AutoCAD 2010 and AutoCAD LT 2010 Update 2 Readme

Thank you for downloading AutoCAD® 2010 and AutoCAD LT® 2010 Update 2.

This readme contains the latest information regarding the installation and use of this update. It is strongly recommended that you read this entire document before you apply this update to your product. For reference, you should save this document to your hard drive or print a copy.

Contents

You can apply this update to the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct update for your software.

You do not have to install Update 1 in order to install Update 2. This update includes Update 1.

You can also use Communication Center to install the Live Update Maintenance Patches, which will automatically show the correct update for your product.

32-bit Product
Update
AutoCAD 2010 AutoCAD2010Update2.exe
AutoCAD LT 2010

AutoCADLT2010Update2.exe 1

or

AutoCADLT2010Update2MLD.exe 2

or

AutoCADLT2010Update2SLD.exe 3

64-bit Product
Update
AutoCAD 2010 AutoCAD2010Update2x64.exe
AutoCAD LT 2010

AutoCADLT2010Update2x64.exe 1

or

AutoCADLT2010Update2MLDx64.exe 2

Identifying  the version of AutoCAD LT you are running:

To identify which AutoCAD LT Update 2 needs to be installed on your system, in Windows Explorer, navigate to the installation folder of AutoCAD LT 2010 (for example, C:\Program Files\AutoCAD LT 2010).

On Windows XP right-click on proddata.dll, select Properties and in the resulted dialog select the Version tab:
On Windows Vista and Windows 7 right-click on proddata.dll, select Properties and in the resulted dialog select the Details tab:

Now match up the File version to the update listed below:

1 If proddata.dll is version 18.0.55.0 or 18.0.215.0, use AutoCADLT2010Update2.exe or AutoCADLT2010Update2x64.exe.

2 If proddata.dll is version 18.0.59.0 or 18.0.215.20, use AutoCADLT2010Update2MLD.exe or AutoCADLT2010Update2MLDx64.exe.

3 If proddata.dll is version 18.0.221.0, use AutoCADLT2010Update2SLD.exe

Return to Top

You can use this update with the following operating systems below.

Service Pack 2 (SP2) and Service Pack 3 (SP3) of the following:

The following and Service Pack 1 (SP1) of the following:

The following Windows 7 operating systems:

Return to Top

When you apply this update while running AutoCAD, it is recommended that you do not click the "Automatically close applications and attempt to restart them after setup is complete" option. Instead, close AutoCAD manually before you install this update.

Return to Top

Subscription Benefits

With this update, if you are a subscription customer, a balloon notification periodically displays, letting you know how much time remains before your subscription expires. This notification will only display three times. You can access selected subscription benefits more quickly, without having to log on to the Subscription Center.

Online Renewal

If you meet the online renewal program rules, you can renew your AutoCAD subscription online. If you have already renewed your subscription, or are not a subscription customer, these options are not available.

eLearning

In InfoCenter, click the Subscription Center button. Under Benefits Center, click View eLearning Catalog. You will be prompted to sign-in to the Subscription Center.

Search

You can access some subscription-only learning and technical support without logging onto the Subscription Center. This includes some eLearning lessons.

New Advantage Packs

When a new Advantage Pack becomes available, a balloon notification and menu option displays. To review and download the Advantage Pack, click the balloon notification or menu option. You must have permission to begin the download. Contract managers and software coordinators can control access to Advantage Packs from Subscription Center > Set Access from Product. Instructions for setting access permissions are provided to contract managers and software coordinators prior to Advantage Pack releases.

Problems Reported with the Customer Error Reporting Utility

As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed. Updates have been made in the following commands and features:

Update 1

Update 2

Return to Top

General Updates

The following defects have been fixed:

2D Drawing

Update 1

Update 2

3D Modeling

Update 1

3D Navigation Tools

Update 1

Update 2

Action Recorder

Update 1

Annotation Scaling

Update 1

API

Update 2

Blocks

Update 1

Check Spelling

Update 1

CUI

Update 1

Customer Involvement Program

Update 2

Data Extraction

Update 1

Update 2

DGN Support

Update 1

Update 2

Digital Signature

Update 1

Dimensions

Update 1

Update 2

DWF

Update 1

DXF

Update 2

Dynamic Dimensions

Update 1

ETransmit

Update 2

Express Tools

Update 2

Export Layout

Update 1

External References

Update 1

Update 2

File Open

Update 1

Update 2

Find and Replace

Update 1

Font

Update 2

General UI

Update 1

Update 2

Graphic System

Update 1

Hatch

Update 1

Update 2

Image

Update 1

Update 2

InfoCenter

Update 2

Inquiry Tools

Update 1

Keyboard Modifiers

Update 1

Layers

Update 1

Update 2

Licensing

Update 1

Linetype

Update2

LiveUpdate

Update 1

Measurement Tools

Update 1

Migration

Update 1

Multileader (mleader)

Update 1

OLE

Update 2

Organic Modeling

Update 2

Osnap

Update 2

PDF

Update 1

Update 2

Property Palette

Update 2

Publish

Update 1

Purge

Update 1

Quick Access Toolbar

Update 2

QUICKCALC

Update 1

Recover

Update 1

Update 2

Reference Edit

Update 1

Ribbon

Update 1

Update 2

Section & Flatten

Update 1

Update 2

Seek

Update 1

Snaps

Update 1

Text

Update 2

UCS

Update 1

Visual Basic

Update 2

Visual Lisp

Update 1

Update 2

Return to Top

Before You Begin

As you prepare to install this update, keep the following in mind:

Back Up Custom Files

It is recommended that you back up all custom CUI, MNR, and MNL files before you apply this update.

Administrative Privileges

During installation, you will be prompted for the original installation media or a network image. In order to apply this update, you must have administrative privileges to install and uninstall products.

Network Deployment

Administrators can deploy this update over a network using the Deployment wizard.

About Your Product

After you install, product information displays in the About dialog box.

Reboot

After you install, be sure to reboot your system even if not prompted.

 

Return to Top

About Windows Command Line Switches

The following Microsoft Windows command line switches are built into this update:

Instructions about how to use the /e command line switch are included in the installation procedures that follow.

Return to Top

Apply This Update to a Stand-Alone Installation

Follow these instructions to install this update on a single computer.

  1. Download the update and save it to any folder.
  2. If required, insert the product media (for example, the AutoCAD installation disc).
  3. Find the folder where you saved the update and double-click the executable (EXE) file.

Return to Top

Apply This Update Through a Local Network

You can use InfoCenter to apply this update through your local network. Detailed instructions on how to set up patching through your local network are listed in the InfoCenter tab of the CAD Manager Control Utility Help.

Note: You can install the CAD Manager Control Utility from the product installation media. Select Install Tools and Utilities and then select Autodesk CAD Manager Tools.

Return to Top

Apply This Update to a Network Administrative Image

The following distribution method applies only to administrative images created with the Deployment wizard. After you complete these procedures, subsequent deployments of your product will include this update.

In all cases, append this update to the deployment. The only time it is appropriate to merge an update is if you intend to distribute the deployment through a group policy object.

The patch (update) file that you download contains an MSP (Microsoft Patch) file, which you extract from the executable file using the /e (extract) switch. For an example of the syntax, see step 2, below.

  1. From the Autodesk Product Support website, download the update EXE file to your local computer.
  2. On the Start menu (Windows), click Run. Enter the following information and click OK.

    <local_drive:>\<patch_name> /e <local_drive:>\< patch_name>.msp

  3. Insert the Autodesk media and launch setup.exe.
  4. Select Create Deployments. Click Next.
  5. On the Begin Deployment page, in the Specify the Deployment Location box, enter the shared network location where you would like to create an administrative image, or click Browse to find a location. Users install the product from this location.
  6. In the Specify a Deployment Name box, enter the name for your deployment.
  7. Continue through the Deployment wizard, and click Configure when allowed. On the Include Service Packs page, click Browse to browse to the update extracted in Step 2. Notice that the update has been added in the Service Packs Included in this Deployment box. Click Configuration Complete.
  8. Follow the instructions in the Deployment wizard to complete the update deployment.

Return to Top

Uninstall This Update

Note: This update cannot be uninstalled when the product is installed from a deployment (also called an administrative image) with a merged update.

Windows XP

  1. From the Start menu (Windows), click Settings > Control Panel.
  2. In Control Panel, click Add or Remove Programs.
  3. In the Add or Remove Programs window, select the Show Updates option.
  4. Find the appropriate update in the list of programs. Click Remove.

Windows Vista and Windows 7

  1. From the Start menu (Windows), click Control Panel.
  2. Click Programs.
  3. Click Programs and Features.
  4. In the Programs and Features window, in the left pane, click View Installed Updates.
  5. Find the appropriate update in the list of updates. Click Uninstall.

NOTE:

After uninstalling Update 1 or Update 2 for AutoCAD 2010 or AutoCAD LT 2010, you will need to repair your AutoCAD 2011 or AutoCAD LT 2011 install. You should do this right after the Update is uninstalled to avoid issues.

Return to Top

This release updates all AutoCAD 2010 and AutoCAD LT 2010 files.

Return to Top


Copyright © 2010 Autodesk, Inc.